KERUSAKAN PADA KLEP MOTOR

damage to the valve which is usually caused by improper adjustment suppose too loose or too tight adjustment of the spigot, probably also on the oil level which is less than the standard, as for how to adjust the valve distinguished:

- Make sure that the piston in position TOP
- Open and close the valve by using the SST valve opener - and then check where a loose valve
- After the discovery of a loose valve and valve sets by using the SST
   adjusting valve
- Remember how to set the correct valve is the valve can be moved laterally to remember
   but can not be moved up and down.
- Manyetel after closing the valve cap back on the spigot
- After the close, and then check the spigot if the setting is just right or not
    namely how to turn the motor denagn then listen to the cylinder head section
    noise which is audible sound or not, still sounding voice klw
    noisy section cylinder heads, setting bererti we do not yet fit
    who once again as above .........